It is the thorough cleaning of the blower chamber, blower motor, burners, combustion chamber, heat exchanger, pilot light, return duct and supply plenum.  And check the evaporator coil air flow, flame igniter, flame sensor and wiring connections.

The older gas furnaces use a pilot light to ignite the burners.  It is a constant burning flame.  The modern furnaces use an electronic igniter to ignite the burners.

The burners are where the fuel mixes with air to create the combustion.  The heat exchanger is located above the combustion chamber and the fan motor blows the warmed air through the supply plenum to the supply registers.

The older gas furnaces use a pilot light to ignite the burners. It is a constant burning flame.

The modern furnaces use an electronic igniter to ignite the burners.

The burners are where the fuel mixes with air to create the combustion.  The heat exchanger is located above the combustion chamber and the fan motor blows the warmed air through the supply plenum to the supply registers.

 furnace_1-768x925

Furnace Cleaning Benefits:

Having regular furnace maintenance is key to a safe and trouble-free economical system.

A clean gas furnace produces the least amount of carbon monoxide while a dirty furnace does the opposite.

Carbon monoxide is a colorless and odorless gas that causes people to become confused, disoriented and possibly death.

A clean and well maintained furnace will maximize energy efficiency and can prevent many of the expensive no-heat emergency service calls.

Dirt and debris should be removed because it affects all the components of the furnace including the air duct system.

Energy Savings

Over 25% of your HVAC systems heating or cooling energy is wasted according to the U.S. Department of Energy. Contaminants in the heating and cooling system cause it to work harder and shorten the life of your system. Although filters are used, the heating and cooling system still gets dirty through normal use.

A clean air duct and HVAC system doesn’t have to work as hard to maintain the desired temperature resulting in less energy is used and leads to improved cost-effectiveness.

Furnace Cleaning Process.

  1. Inspect and assess the Furnace system
  2. Perform cleaning and restoration procedures
  3. Customer sign-off

Air Duct System Cleaning Schedule.

Many of our customers have their furnace inspected and cleaned every 2 years.  They also have it done after a home remodeling or construction project because debris and other contaminants get pulled into the furnace system.

Contact Us